Table of Contents

产品图

nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_001.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_002.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_003.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_004.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_005.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_006.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_6000_007.jpg

描述图

规格

主要应用:深度雕刻,绘图,简单切割等
接口规格:4pin PH2.0(红:12V,黑:GND,黄:PWM,绿:温度信号)
散热器尺寸:30*60mm
波长:450nm
材质:铜+铝
重量:128g
驱动位置:内置
功率是否可调:可以PWM调节功率
驱动保护功能:浪涌保护,过压保护
输入功率:大约12V550ma(不包含风扇功率)
线长:300mm
线长材质:运动硅胶
控制线安装方式:一体式
风扇尺寸:30*10mm
风扇转速:10000转
可控温度:小于60摄氏度
聚焦范围:10-100mm(最佳焦点:距离出光口50mm)
安全警告:请在做好安全防护的前提下应用此模组!
推荐应用机器:NEJE Master
包装清单:
1 x 模组
2 x 螺丝
2 x 垫片
Main applications: deep engraving, drawing, simple cutting, etc.
Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: 
temperature signal)
Radiator size: 30*60mm
Wavelength: 450nm
Material: copper + aluminum
Weight: 128g
Drive position: built-in
Is the power adjustable: PWM can be adjusted
Drive protection: surge protection, overvoltage protection
Input power: approx. 12V550ma (without fan power)
Line length: 300mm
Line length material: sports silicone
Control line installation method: integrated
Fan size: 30*10mm
Fan speed: 10,000 rpm
Controllable temperature: less than 60 degrees Celsius
Focus range: 10-100mm (best focus: 50mm from the light exit)
Safety Warning: Please apply this module under the premise of safety protection!
Recommended application machine: NEJE Master
packing list:
1 x module
2 x screw
2 x gasket