Differences

This shows you the differences between two versions of the page.

--- laser_module_3060_405nm_3500mw [2019/08/30 17:30]
wuhonghe
+++ laser_module_3060_405nm_3500mw [2019/08/30 17:59] (current)
wuhonghe
@@ Line 1: / Line 1: @@
 {{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_3500U/005.jpg?250x250}}
 {{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_3500U/006.jpg?250x250}}
+  Main applications: grayscale engraving, drawing, simple depth engraving, simple cutting, etc.
+  Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
+  Wavelength: 405nm
+  Radiator size: 30*60mm
+  Material: copper + aluminum
+  Weight: 121g
+  Drive position: built-in
+  Is the power adjustable: PWM can be adjusted
+  Drive protection: surge protection, overvoltage protection
+  Input power: approx. 12V280ma (including fan power)
+  Line length: 300mm
+  Control line installation method: split type
+  Fan size: 30*10mm
+  Fan speed: 10,000 rpm
+  Controllable temperature: less than 60 degrees Celsius
+  Focus range: 5-50mm
+  Best focal length: 10mm from the light exit
+  Safety Warning: Please apply this module under the premise of safety protection!
+  Recommended application machine: NEJE Master
+  packing list:
+x module
+x screw
+x gasket