Differences

This shows you the differences between two versions of the page.

--- ro:laser_module_450nm_7wu [2019/06/16 23:20]
wuhonghe
+++ ro:laser_module_450nm_7wu [2019/06/25 23:36]
wuhonghe
@@ Line 1: / Line 1: @@
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/001.jpg}}
+===== 产品图 =====
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/002.jpg}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/003.jpg}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/004.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/001.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/005.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/002.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/006.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/003.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/007.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/004.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/008.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/005.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/009.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/006.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/010.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/007.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/011.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/008.jpg?250x250}}
-{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/012.jpg}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/009.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/010.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/011.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/012.jpg?250x250}}
+===== 描述图 =====
+===== 规格 =====
    主要应用：金属雕刻，深度雕刻，简单切割等
@@ Line 37: / Line 49: @@
 x 控制线
+-----------------------
-    Main applications: metal engraving, deep engraving, simple cutting, etc.
+  Main applications: metal engraving, deep engraving, simple cutting, etc.
-    Wavelength: 450nm
+  Wavelength: 450nm
-    Radiator size: 30*60mm
+  Radiator size: 30*60mm
-    Material: copper + aluminum
+  Material: copper + aluminum
-    Weight: 116g
+  Weight: 116g
-    Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
+  Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
-    Drive position: built-in
+  Drive position: built-in
-    Is the power adjustable: PWM can be adjusted
+  Is the power adjustable: PWM can be adjusted
-    Drive protection: surge protection, overvoltage protection
+  Drive protection: surge protection, overvoltage protection
-    Input power: approx. 12V750ma does not include fan power
+  Input power: approx. 12V750ma does not include fan power
-    Line length: 300mm
+  Line length: 300mm
-    Control line installation method: pluggable
+  Control line installation method: pluggable
-    Fan size: 30*10mm
+  Fan size: 30*10mm
-    Fan speed: 10,000 rpm
+  Fan speed: 10,000 rpm
-    Controllable temperature: less than 60 degrees Celsius
+  Controllable temperature: less than 60 degrees Celsius
-    Focus range: 5-50mm
+  Focus range: 5-50mm
-    Best focal length: 10mm from the light exit
+  Best focal length: 10mm from the light exit
-    Safety Warning: Please apply this module under the premise of safety protection!
+  Safety Warning: Please apply this module under the premise of safety protection!
-    Recommended application machine: NEJE Master
+  Recommended application machine: NEJE Master
-    packing list:
+  packing list:
 x module
 x screw
 x gasket
 x control line

Show page