The windows software works good, built in text function, Importing of images including: BMP, JPG, PNG

The android APP built in text function, Importing of images including: BMP, JPG, PNG

Support Bluetooth function wireless transmission of data and control, with android and ios APP. Install the android app and ios app to take photos directly or select images from the album.

Support “neje scanner” app take a JPG of png photo from camera or album, and send the photo to the windows software directly.

Built-in 6000 mAh polymer lithium battery, can be used anywhere, and supports mobile power supply.

Good for gray scale photo with text

Normal photos are going to come out well




— “NEJE CLOUD” provides thousands of engraving materials and resources to download and keep updating.

—Software is fairly easy to use. You can do the complex edits in PS or similar and just burn with the included program. The software is automatically connected.

—Professional file processing algorithm, the software can restore your design 1:1 lossless to each pixel.

—Safety and easy, One piece of magnet Protective panel and overhead safety switch.

—Compatible with a variety of power lasers, Supporting 2pin 405nm 1000mw, 2pin 405nm 2000mw, 4pin 445nm 3000mw, Support TTL control and temperature sensing.

—Standard 405nm laser tube, 405nm laser is easily absorbed by the material, the engraving effect is very delicate,

—The laser focus is easy to adjust with your hands as adjusting the laser point.

—Support “neje Scanner” app, intelligent collection and creation, photo scanning, intelligent algorithm automatic connection printing.

—The Windows version allows you to adjust laser power, the adjustment you have is burn depth and speed. (Only use it with 4pin 3000mw)

—It does have 1 very good feature in that it gives you an outline of the burn area before you actually burn which allows you to position your object

—The more impressive thing was the detail that this thing is capable of, You can literally engrave fonts that are around Size 8 and they burn crystal clear with the settings. We suggest doing a lot of experimenting because in the end, once you get the right calibration, this thing is capable of incredible detail and quality engravings. You may also want to mess around with the contrast settings if you are engraving complex images. For tiny details, you may want to try using the lowest possible settings in depth/power (low, but still enough power to leave a mark).

—Getting the driver and software installed was real easy. Download and install directly from the link, the software will be automatically connected after opening the software.

—You can check your work after a pause. and starts back up where it left off.


1. It can not engrave metal, acrylic and any other retardant material. white material doesn't work well.

2.The product is only suitable for personal diy, because of the speed of carving, it is not recommended for industrial use

3.When the machine is working, it is recommended not to look directly at the laser head, and not to operate the laser head directly by hand

4.Laser diode is a sensitive component, pay attention to prevent electrostatic damage (product includes electrostatic protection design, but there is a certain probability of damage)

5.The Laser Module warranty time is 1 yesr

6.The controller board warranty time is 3 yesr


where do you put items underneath it?

How do you determine the working area?

How do you increase/decrease image size?

What should you set the various settings to, based on the working material (ie, depth, power, etc.)


Material: Acrylic + Aluminum + Stainless Steel

Main Color: Black

Laser Power: 1500mW ( Laser Input: about 5v300mA)

Laser Wave Length: 405nm

Image Format:.bmp \ .jpg \ .png etc..

Image Size:550 * 550 pixels / 0.075mm point distance

Support System: Win7 / Win8 / XP / Win10 , android APP(neje scanner,use it with windows software), adroid APP(controller), Ios APP

Supply Voltage: 12V2A

Items can be carved including: mahogany, bamboo, paper cards, ivory, leather, flammable plastic, PCBA, etc. please take notice that the laser head is easily-consumed products ,so we promise to supply again within three month if the laser head is Inhuman if you laser head is Inhuman damage , please do not give negative comment thanks for your support.

Package List:

1 * Engraving Machine

1 * Magnet Protective panel

1 * USB Cable

1 * Wrench

1 * Whiteboard Marker

2 * Wood Block

2 * Paper

Note: that the manual and CD-ROM are not included, software download and use help by neje wiki service



Main Picture















nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_130.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_131.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_132.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_133.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_134.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_135.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_136.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_137.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_138.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_141.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_142.jpg nejetool.oss-us-west-1.aliyuncs.com_studio_bl1500_143.jpg

  • Show pagesource