This is an old revision of the document!


nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_001.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_002.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_003.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_004.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_005.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_006.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_007.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_008.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_009.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_010.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_011.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_7w_012.jpg

 主要应用:金属雕刻,深度雕刻,简单切割等
 波长:450nm             
 散热器尺寸:30*60mm
 材质:铜+铝
 重量:116g             
 接口规格:4pin PH2.0(红:12V,黑:GND,黄:PWM,绿:温度信号)
 驱动位置:内置
 功率是否可调:可以PWM调节功率
 驱动保护功能:浪涌保护,过压保护
 输入功率:大约12V750ma 不包含风扇功率             
 线长:300mm
 控制线安装方式:可插式             
 风扇尺寸:30*10mm
 风扇转速:10000转
 可控温度:小于60摄氏度             
 聚焦范围:5-50mm
 最佳焦距:距离出光口10mm             
 安全警告:请在做好安全防护的前提下应用此模组!             
 推荐应用机器:NEJE Master            
 包装清单:
 1 x 模组
 2 x 螺丝
 2 x 垫片
 1 x 控制线
  Main applications: metal engraving, deep engraving, simple cutting, etc.

    Wavelength: 450nm     Radiator size: 30*60mm     Material: copper + aluminum     Weight: 116g     Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)     Drive position: built-in     Is the power adjustable: PWM can be adjusted     Drive protection: surge protection, overvoltage protection     Input power: approx. 12V750ma does not include fan power     Line length: 300mm     Control line installation method: pluggable     Fan size: 30*10mm     Fan speed: 10,000 rpm     Controllable temperature: less than 60 degrees Celsius     Focus range: 5-50mm     Best focal length: 10mm from the light exit     Safety Warning: Please apply this module under the premise of safety protection!     Recommended application machine: NEJE Master     packing list:     1 x module     2 x screw     2 x gasket     1 x control line

  • Show pagesource