Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
ro:laser_module_405nm_3500u [2019/06/16 22:27] wuhonghe |
ro:laser_module_405nm_3500u [2019/06/16 23:30] wuhonghe |
||
|---|---|---|---|
| Line 17: | Line 17: | ||
| 输入功率：大约12V280ma（包含风扇功率） | 输入功率：大约12V280ma（包含风扇功率） | ||
| 线长：300mm | 线长：300mm | ||
| - | 控制线安装方式：一体式 | + | 控制线安装方式：分体式 |
| 风扇尺寸：30*10mm | 风扇尺寸：30*10mm | ||
| 风扇转速：10000转 | 风扇转速：10000转 | ||
| 可控温度：小于60摄氏度 | 可控温度：小于60摄氏度 | ||
| - | 聚焦范围：10-100mm | + | 聚焦范围：5-50mm |
| - | 最佳焦距：距离出光口50mm | + | 最佳焦距：距离出光口10mm |
| 安全警告：请在做好安全防护的前提下应用此模组！ | 安全警告：请在做好安全防护的前提下应用此模组！ | ||
| 推荐应用机器：NEJE Master | 推荐应用机器：NEJE Master | ||
| Line 29: | Line 29: | ||
| 2 x 螺丝 | 2 x 螺丝 | ||
| 2 x 垫片 | 2 x 垫片 | ||
| + | |||
| + | |||
| + | |||
| + | Main applications: grayscale engraving, drawing, simple depth engraving, simple cutting, etc. | ||
| + | Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) | ||
| + | Wavelength: 405nm | ||
| + | Radiator size: 30*60mm | ||
| + | Material: copper + aluminum | ||
| + | Weight: 121g | ||
| + | Drive position: built-in | ||
| + | Is the power adjustable: PWM can be adjusted | ||
| + | Drive protection: surge protection, overvoltage protection | ||
| + | Input power: approx. 12V280ma (including fan power) | ||
| + | Line length: 300mm | ||
| + | Control line installation method: split type | ||
| + | Fan size: 30*10mm | ||
| + | Fan speed: 10,000 rpm | ||
| + | Controllable temperature: less than 60 degrees Celsius | ||
| + | Focus range: 5-50mm | ||
| + | Best focal length: 10mm from the light exit | ||
| + | Safety Warning: Please apply this module under the premise of safety protection! | ||
| + | Recommended application machine: NEJE Master | ||
| + | packing list: | ||
| + | 1 x module | ||
| + | 2 x screw | ||
| + | 2 x gasket | ||
| | | ||