Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
ro:laser_module_450nm_7wu [2019/06/16 23:16] wuhonghe |
ro:laser_module_450nm_7wu [2019/06/16 23:20] wuhonghe |
||
|---|---|---|---|
| Line 13: | Line 13: | ||
| | | ||
| 主要应用：金属雕刻，深度雕刻，简单切割等 | 主要应用：金属雕刻，深度雕刻，简单切割等 | ||
| - | 波长：450nm | + | 波长：450nm |
| - | | + | |
| 散热器尺寸：30*60mm | 散热器尺寸：30*60mm | ||
| 材质：铜+铝 | 材质：铜+铝 | ||
| - | 重量：116g | + | 重量：116g |
| - | | + | |
| 接口规格：4pin PH2.0（红：12V，黑：GND，黄：PWM，绿：温度信号） | 接口规格：4pin PH2.0（红：12V，黑：GND，黄：PWM，绿：温度信号） | ||
| 驱动位置:内置 | 驱动位置:内置 | ||
| 功率是否可调：可以PWM调节功率 | 功率是否可调：可以PWM调节功率 | ||
| 驱动保护功能：浪涌保护，过压保护 | 驱动保护功能：浪涌保护，过压保护 | ||
| - | 输入功率：大约12V750ma 不包含风扇功率 | + | 输入功率：大约12V750ma 不包含风扇功率 |
| - | | + | |
| 线长：300mm | 线长：300mm | ||
| - | 控制线安装方式：可插式 | + | 控制线安装方式：可插式 |
| - | | + | |
| 风扇尺寸：30*10mm | 风扇尺寸：30*10mm | ||
| 风扇转速：10000转 | 风扇转速：10000转 | ||
| - | 可控温度：小于60摄氏度 | + | 可控温度：小于60摄氏度 |
| - | | + | |
| 聚焦范围：5-50mm | 聚焦范围：5-50mm | ||
| - | 最佳焦距：距离出光口10mm | + | 最佳焦距：距离出光口10mm |
| - | + | 安全警告：请在做好安全防护的前提下应用此模组！ | |
| - | 安全警告：请在做好安全防护的前提下应用此模组！ | + | 推荐应用机器：NEJE Master |
| - | + | ||
| - | 推荐应用机器：NEJE Master | + | |
| - | + | ||
| 包装清单： | 包装清单： | ||
| 1 x 模组 | 1 x 模组 | ||
| Line 45: | Line 37: | ||
| 1 x 控制线 | 1 x 控制线 | ||
| + | |||
| + | Main applications: metal engraving, deep engraving, simple cutting, etc. | ||
| + | Wavelength: 450nm | ||
| + | Radiator size: 30*60mm | ||
| + | Material: copper + aluminum | ||
| + | Weight: 116g | ||
| + | Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) | ||
| + | Drive position: built-in | ||
| + | Is the power adjustable: PWM can be adjusted | ||
| + | Drive protection: surge protection, overvoltage protection | ||
| + | Input power: approx. 12V750ma does not include fan power | ||
| + | Line length: 300mm | ||
| + | Control line installation method: pluggable | ||
| + | Fan size: 30*10mm | ||
| + | Fan speed: 10,000 rpm | ||
| + | Controllable temperature: less than 60 degrees Celsius | ||
| + | Focus range: 5-50mm | ||
| + | Best focal length: 10mm from the light exit | ||
| + | Safety Warning: Please apply this module under the premise of safety protection! | ||
| + | Recommended application machine: NEJE Master | ||
| + | packing list: | ||
| + | 1 x module | ||
| + | 2 x screw | ||
| + | 2 x gasket | ||
| + | 1 x control line | ||