Differences

This shows you the differences between two versions of the page.

--- laser_module_30607w [2019/06/19 15:04]
wuhonghe created
+++ laser_module_30607w [2019/12/30 12:14]
wuhonghe
@@ Line 1: / Line 1: @@
-updating
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/001.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/002.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/003.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/004.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/006.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/007.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/008.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/009.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/010.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/011.jpg?250x250}}
+{{http://nejetool.oss-us-west-1.aliyuncs.com/wiki/module_7w/012.jpg?250x250}}
+  Main applications: deep engraving, simple cutting,  aluminum oxide etc.
+  Wavelength: 450nm
+  Radiator size: 30*60mm
+  Material: copper + aluminum
+  Weight: 116g
+  Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
+  Drive position: built-in
+  Is the power adjustable: PWM can be adjusted
+  Drive protection: surge protection, overvoltage protection
+  Input power: approx. 12V750ma does not include fan power
+  Line length: 300mm
+  Control line installation method: pluggable
+  Fan size: 30*10mm
+  Fan speed: 10,000 rpm
+  Controllable temperature: less than 60 degrees Celsius
+  Focus range: 5-50mm
+  Best focal length: 10mm from the light exit
+  Safety Warning: Please apply this module under the premise of safety protection!
+  Recommended application machine: NEJE Master
+  packing list:
+x module
+x screw
+x gasket
+x control line

Show page