nejetool.oss-us-west-1.aliyuncs.com_wiki_module_3500u_005.jpg nejetool.oss-us-west-1.aliyuncs.com_wiki_module_3500u_006.jpg

Main applications: grayscale engraving, drawing, simple depth engraving, simple cutting, etc.
Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
Wavelength: 405nm
Radiator size: 30*60mm
Material: copper + aluminum
Weight: 121g
Drive position: built-in
Is the power adjustable: PWM can be adjusted
Drive protection: surge protection, overvoltage protection
Input power: approx. 12V280ma (including fan power)
Line length: 300mm
Control line installation method: split type
Fan size: 30*10mm
Fan speed: 10,000 rpm
Controllable temperature: less than 60 degrees Celsius
Focus range: 5-50mm
Best focal length: 10mm from the light exit
Safety Warning: Please apply this module under the premise of safety protection!
Recommended application machine: NEJE Master
packing list:
1 x module
2 x screw
2 x gasket
  • Show pagesource